Sending Snapshots To The Viewstation; Viewing Snapshots From The Viewstation - Polycom ViewStation EX User Manual

Chapter 4

Sending Snapshots to the ViewStation

Viewing Snapshots from the ViewStation

© Polycom, Inc.
4. Use the ARROW buttons on the remote control to move
backward and forward through a presentation. Use the following
table to navigate the presentation menu for the ViewStation:
Button
UP ARROW
DOWN ARROW
LEFT ARROW
RIGHT ARROW
MENU
SELECT
SLIDES
ViewStations with an additional camera(s) can send a snapshot for
any camera connected to the ViewStation by pressing the
SNAPSHOT button on the remote control.
Complete the following to send a snapshot to the ViewStation:
1. Press the SNAPSHOT button on the remote control.
2. Select the desired camera (1, 2, or 3.)
3. Press the SNAPSHOT button again to send the snapshot to the
ViewStation.
4. Press the SNAPSHOT button again to return to live video.
Up to 12 users can view ViewStation snapshots by completing the
following steps:
1. Open a web browser.
2. Enter the IP address of the ViewStation in the browser address
bar.
3. Select View a Presentation.
4. Enter the user name (and password if required).
Goes to the beginning of the presentation.
Goes to the end of the presentation.
Moves the highlight marker to the left.
Moves the highlight marker to the right.
Switch between viewing a thumbnail and
viewing the full slide.
Return to live video or select a slide from
thumbnails.
Select another presentation.
145
Using the ViewStation with a PC
Action
ViewStation User Guide