Placing Telephone Calls With The Viewstation; Placing A Telephone Call - Polycom ViewStation EX User Manual

Chapter 3

Placing Telephone Calls with the ViewStation

Placing a Telephone Call

© Polycom, Inc., 2001
In countries that use the North American POTS standard, connect
an analog telephone line to the back of the ViewStation.
With a POTS line, you can use the ViewStation to:
• Make an audio telephone call
• Add a third-party audio call to a video call
• Add a video call while in an audio telephone call
The following sections describe how to make these calls
To place a telephone call using the ViewStation, the ViewStation
must first be connected to a standard POTS or PBX wall jack. See
the ViewStation Quickstart card for more information. To make a call:
1. From the Main Calling screen, highlight the Telephone icon
and press the SELECT button on the remote control.
The Telephone screen is displayed.
Figure 3-14. Telephone Screen
2. Using the numeric keypad on the remote control, enter the
phone number of the party to be called. If dialing within a PBX
system, enter the extension number typically used within your
PBX system.
113
Using the ViewStation
ViewStation User Guide