Power Source; Nt-1 Device; What's In The Box - Polycom ViewStation EX User Manual

Polycom viewstation ex: user guide
Hide thumbs Also See for ViewStation EX:
Table of Contents

Advertisement

Chapter 1
Television Monitors

Power Source

NT-1 Device

What's in the Box

What's in the Box
ViewStation Unit
Microphone Pod
Remote Control
Power Supply with Cord
ViewStation User Guide
to enable multi-point calling capability on the ViewStation H.323
with BRI or DCP, and an Ethernet LAN connection if H.323 is
used.
Note
Multi-Point is available for the ViewStation H.323 or
ViewStation 128 with a hardware upgrade.
Any S-Video or composite television monitor with RCA input ports
may be used with the ViewStation. The size of the television monitor
should be proportional to the size of the room where the ViewStation
is used. One television monitor may be used for video and a second
monitor may be used to display graphics.
The ViewStation has an auto-sensing 62-watt external power supply
that supports line voltages between 100 and 240 VAC, 50 to 60 Hz.
An ISDN Network Termination (NT-1) device may be required
between the ISDN line and the ViewStation if your system is
connected to a PBX or an ISDN line in North America, specifically,
an ISDN U interface.
The following items are included in the box. These items pertain to
all ViewStation models. If an item is missing or damaged, contact
your reseller.
H.323
ViewStation Models
512
128
2
Getting Started
V.35
MP
DCP
www.polycom.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents