Volume - Polycom ViewStation EX Api Manual

volume

ViewStation EX, ViewStation FX, and VS4000 API Guide
down Moves the calibration frame down.
get Displays the current setting (up or down).
Example
vgavertpos down
User Interface Screen Location
System Info>Admin Setup>Video/Cameras>VGA Input: Vertical
Position
This screen is only visible if a Visual Concert FX unit is connected to
your system.
volume <set|up|down|get|register|
unregister>
volume set <{0..24}>
Description
This command is used to change the audio volume (not sound
effects) on the system.
set Sets the volume to a specified level. Requires a
parameter from {0..24}.
up Increases the audio volume by 1.
down Decreases the audio volume by 1.
get Displays the current volume level.
register Registers the system to give notification when the
volume level changes.
unregister Disables register mode.
0..24 Range of volume levels.
Example
volume set 10
168 www.polycom.com