Camera4Ptz; Cameradirection - Polycom ViewStation EX Api Manual

camera4ptz

cameradirection

ViewStation EX, ViewStation FX, and VS4000 API Guide
camera4ptz <yes|no|get>
Description
This command sets camera source 4 to pan-tilt-zoom mode. This
command is specific to the VS4000 system.
Note See the command camerainput on page 37 to set your
VS4000 camera source to S-video or composite mode.
yes Enables pan-tilt-zoom mode.
no Disables pan-tilt-zoom mode.
get Displays the current setting (yes or no).
Example
camera4ptz get
User Interface Screen Location
System Info>Admin Setup>Video/Camera>Cameras>VS4000
Camera Setup
cameradirection <normal|reversed|get>
Description
This command selects whether the camera moves in the same
direction (normal) as the arrows on the remote control or in opposite
(reversed) direction.
normal Sets the direction of the camera to normal.
reversed Sets the direction of the camera to reversed.
get Displays current settings (normal or reversed).
36 www.polycom.com