Snapshot - Polycom ViewStation EX Api Manual

snapshot

ViewStation EX, ViewStation FX, and VS4000 API Guide
list List all loaded presentations (displays names and
IP addresses) available for viewing. The names
are the names of the PCs from which the
presentations are loaded.
" "
select < pres >Selects slide presentation pres from the list by
name. pres is generally the name of your computer
on the network. This name appears in the
pcPresent "Enter your Name" field.
password Enters the presentation password.
start Displays the first slide.
register Registers the Telnet or RS-232 session to receive
notifications about slides that are sent or received.
unregister Unregisters the Telnet or RS-232 session to
receive notifications about slides that are sent or
received.
Note Use quotation marks around a compound name or strings
containing spaces (Ex: "united states" or "111 222 333").
Example
slides select presPC
snapshot <0|1|2|3|4|register|unregister>
Description
This command sends a snapshot of the near site to the far site (or if
0 is specified, sends a snapshot of the far site to the near site if you
are in a video call). If you are not in a call, it displays the snapshot
on the near site until you clear it.
0 Generates a snapshot from the far-site camera.
1 Generates a snapshot from the near camera 1.
2 Generates a snapshot from the near camera 2
(document camera).
130 www.polycom.com