Prichannel - Polycom ViewStation EX Api Manual

prichannel

ViewStation EX, ViewStation FX, and VS4000 API Guide
prichannel <set|get> <all|{1..<23|30>}>
<on|off>
prichannel set all <on|off>
prichannel set <{1..23}> <on|off>
prichannel set <{1..30}> <on|off>
prichannel set
prichannel get all <on|off>
prichannel get <{1..23}> <on|off>
prichannel get <{1..30}> <on|off>
Description
This command selects the PRI channels that will be active for the
PRI line.
set Sets the PRI channels to be active when followed by a
parameter from <all|{1..<23|30>}> and from <on|off>.
If you want to erase the current settings, omit the
parameters.
get Displays the current setting(on or off). Requires a
parameter from <all|{1..<23|30>}>.
all Selects all PRI channels.
1..23|30 Range of available PRI channels. For PRI E1, the range
is 1..30. For PRI T1, the range is 1..23.
on Activates the selected PRI channels.
off Disables the selected PRI channels.
Example 1
prichannel set all on
182 www.polycom.com