Prilinesignal - Polycom ViewStation EX Api Manual

prilinesignal

ViewStation EX, ViewStation FX, and VS4000 API Guide
prilinesignal <set|get><esf/b8zs|crc4/hdb3|
hdb3>
prilinesignal set <esf/b8zs|crc4/hdb3|hdb3>
prilinesignal get
Description
This command sets the PRI line signal.
set Sets the PRI line signal. It requires a parameter from
<esf/b8zs|crc4/hdb3|hdb3
get Displays the current PRI line signal setting.
esf/b8zs A method of signal encoding used with a T1 interface.
This is the only choice for T1. This value actually
chooses both a framing format and an encoding
method. Legacy frame formats, such as D4, are not
supported. In addition, older encoding methods, such
as B7ZS, are not supported.
crc4/hdb3 A method of signal encoding used with an E1 interface.
This is the default value. Data is encoded using HDB3
to ensure proper one-density, and CRC4 error checking
is enabled on both transmit and receive.
hdb3 A method of signal encoding used with an E1 interface.
CRC4 error checking is disabled.
Example
prilinesignal set esf/b8zs
User Interface Screen Location
System Info>Admin Setup>Video Network>IMUX>PRI Network>
PRI Setup: Line Signaling
This screen is only accessible if you have a PRI network interface
connected to your ViewStation FX or VS4000 system.
188
>
.
www.polycom.com