Isdncountrycode - Polycom ViewStation EX Api Manual

isdncountrycode

© Polycom, Inc. 2003
ViewStation EX, ViewStation FX, and VS4000 API Guide
isdncountrycode <set|get> ["country code"]
isdncountrycode set ["country code"]
isdncountrycode set
isdncountrycode get
Description
This command sets the ISDN country code associated with the
country where the system is used. The system is generally able to
automatically determine the country code based on the country you
selected during initial system setup.
set Sets the ISDN country code when followed by the
country code parameter. If you want to erase the
current setting, omit country code.
get Displays the country code information.
country codeNumeric value. This code is the same as the
telephone country code.
Example
isdncountrycode set 1
User Interface Screen Location
System Info>Admin Setup>Video Network>ISDN Network: ISDN
Video Numbers>Country Code
Note This screen is only accessible if you have a Quad BRI
network interface connected to your system.
175