Subnetmask - Polycom ViewStation EX Api Manual

subnetmask

ViewStation EX, ViewStation FX, and VS4000 API Guide
set Sets the stream video port when followed by the video
port parameter. If you want to erase the current setting,
omit the parameter.
get Displays the current setting.
video port Video port number.
Example
streamvideoport 16386
User Interface Screen Location
System Info>Admin Setup>LAN/H.323>Streaming: Video Port
subnetmask <set|get> ["xxx.xxx.xxx.xxx"]
subnetmask set ["xxx.xxx.xxx.xxx"]
subnetmask set
subnetmask get
Description
This command sets the system's subnet mask. After a change is
made, the system prompts the user for restart.
set Sets the system's subnet mask when followed by
the xxx.xxx.xxx.xxx parameter. If you want to
erase the current setting, omit the parameter.
get Displays the current setting.
xxx.xxx.xxx.xxxSystem's subnet mask.
Example
subnetmask 255.255.255.0
User Interface Screen Location
System Info>Admin Setup>LAN/H.323>LAN/Intranet>LAN &
Intranet: Subnet Mask
144 www.polycom.com