Run; Screen - Polycom ViewStation EX Api Manual

run

screen

ViewStation EX, ViewStation FX, and VS4000 API Guide
User Interface Screen Location
System Info>Admin Setup>Software/Hardware>RS-232
run <"scriptfilename">
Description
This command loads a file from the flash file system and then
executes the API commands contained in it. Each command needs
to be placed on a single line with a <CR><LF> as a terminator.
scriptfilename Name of the script file containing the API
commands to be executed.
Note Use quotation marks around a compound name or strings
containing spaces (Ex: "united states" or "111 222 333").
Example
run startcall.bat
screen <addressbook|farvideo|main|
nearvideo|sysinfo|speeddial|disableui|enableui
|chaircontrol|sleep|wake>
Description
This command causes a specified screen to be the current screen
on the system.
addressbook Goes to the Address Book screen.
farvideo Goes to the far-site video screen (when in a call).
main Goes to the main user interface screen.
nearvideo Goes to the near-site video screen.
sysinfo Goes to the System Information screen.
124 www.polycom.com