Systembehindnat - Polycom ViewStation EX Api Manual

systembehindnat

© Polycom, Inc. 2003
ViewStation EX, ViewStation FX, and VS4000 API Guide
systembehindnat <yes|no|get>
Description
This command sets the system behind a NAT (Network Address
Translation) device. Select this option if your system is behind a NAT
device that is not H.323 aware. If your system is behind an
H.323-aware NAT device, make sure this option is not selected or
your system will not be able to make or receive calls. When using a
Virtual Private Network (VPN) for your network connection, make
sure this option is not selected.
yes Sets the system to be behind a NAT and use the NAT
Outside (WAN) Address.
no Disables the option.
get Displays the current setting (yes or no).
Example
systembehindnat yes
User Interface Screen Location
System Info>Admin Setup>LAN/H.323>LAN/Intranet>Firewall/LAN
Connection: System is Behind a NAT
145