ISDN PRI Commands
priareacode
ViewStation EX, ViewStation FX, and VS4000 API Guide
The following commands are specific to the ISDN PRI network
interface.
priareacode <set|get> ["area code"]
priareacode set ["area code"]
priareacode set
priareacode get
Description
This command sets the PRI area code.
set
Sets the PRI area code when followed by the area code
parameter. If you want to erase the current setting, omit
area code.
get
Displays the current setting.
area code Numeric string specifying the area code.
Example
priareacode set 512
User Interface Screen Location
System Info>User Setup>Video Network>IMUX>Numbers
This screen is only accessible if you have a PRI network interface
connected to your ViewStation FX or VS4000 system.
180
www.polycom.com