Polycom ViewStation EX Api Manual page 210

st
ViewStation EX, ViewStation FX, and VS4000 API Guide
Example
rts normal
User Interface Screen Location
System Info>Admin Setup>Video Network>Advanced V.35: RTS
This screen is only accessible if you have a
V.35/RS-449/RS-530/RS-366 network interface connected to your
system.
st <normal|inverted|get>
Description
This command lets you configure the st serial interface control signal
(send timing: clock). The default setting for this signal is normal.
normal Sets the signal to normal (falling edge sends data).
inverted Sets the signal to inverted (rising edge sends data).
get Displays the current setting for this option (normal or
inverted).
Example
st get
User Interface Screen Location
System Info>Admin Setup>Video Network>Advanced V.35: ST
This screen is only accessible if you have a
V.35/RS-449/RS-530/RS-366 network interface connected to your
system.
202 www.polycom.com