Secondarycallchoice - Polycom ViewStation EX Api Manual

secondarycallchoice

© Polycom, Inc. 2003
ViewStation EX, ViewStation FX, and VS4000 API Guide
speeddial Goes to the Speed Dial screen.
disableui Turns off the user interface.
enableui Turns on the user interface.
chaircontrol Goes to the main Chair Control screen.
sleep Causes the system to go into sleep mode.
wake Wakes up the system from sleep mode.
Example
screen sysinfo
secondarycallchoice <isdn|ip|none|get>
Description
This command sets the Global Address Book (GAB) Secondary Call
Type Choice. It sets which call type the system will try second when
dialing a site (which can be reached via H.320 and H.323) from the
Address Book. It is automatically reset to none if the setting matches
that of the Primary Call Type Choice (see the command
primarycallchoice on page 117).
isdn Selects ISDN as the Secondary Call Type Choice.
ip Selects IP as the Secondary Call Type Choice.
none No call type is selected.
get Displays the current setting (isdn, ip, or none).
Example
secondarycallchoice isdn
User Interface Screen Location
System Info>Admin Setup>VIdeo Network>Call Preferences:
Secondary Call Type Choice
125