Ipaddress - Polycom ViewStation EX Api Manual

ipaddress

© Polycom, Inc. 2003
ViewStation EX, ViewStation FX, and VS4000 API Guide
invalid characters are removed from the system name to
obtain a valid LAN host name. If the resulting string is
empty, the default LAN host name is Admin.
Example 1
hostname set MySystem
Example 2
hostname set
Output to Example 2
hostname ADMIN
User Interface Screen Location
System Info>Admin Setup>LAN/H.323>LAN/Intranet>LAN &
Intranet: Host Name
ipaddress <set|get> ["xxx.xxx.xxx.xxx"]
ipaddress set ["xxx.xxx.xxx.xxx"]
ipaddress set
ipaddress get
Description
This command sets the LAN IP address of the system. Use this
command when you need to allocate a static IP address to your
system. After a change is made, the system prompts the user for
restart.
Note This setting can only be changed when DHCP is off.
set Sets the LAN IP address when followed by the
xxx.xxx.xxx.xxx parameter. If you want to erase
the current setting, omit xxx.xxx.xxx.xxx.
get Displays the current setting for this option.
89