Mute - Polycom ViewStation EX Api Manual

mute

ViewStation EX, ViewStation FX, and VS4000 API Guide
User Interface Screen Location
System Info>User Setup: Multipoint Mode
mute <near|far|register|unregister>
mute near <on|off|toggle|get>
mute far get
mute register
mute unregister
Description
This command sets the near or far site mute mode. It can also set
the system to register or unregister mode. In register mode, the
system sends notification to the RS-232 or Telnet session when the
far or near site is muted or unmuted.
near Sets the command for the near site. It requires one of
the following parameters: on, off, toggle, or get.
far Sets the command for the far site. It requires the
parameter get.
register Registers the system to give notification when the mute
mode changes.
unregister Disables register mode.
on Turns on the mute mode for the near site (mute near).
off Turns off the mute mode for the near site (mute near).
toggle If in mute near on mode, switches to the other mode
setting (mute near off) and vice versa.
get Displays the current setting for the near or far site (mute
near|far get).
Example
mute near on
106 www.polycom.com