H331Videoprotocol; H331Videoformat - Polycom ViewStation EX Api Manual

h331videoprotocol

h331videoformat

© Polycom, Inc. 2003
ViewStation EX, ViewStation FX, and VS4000 API Guide
h331videoprotocol <h263|h261|get>
Description
This command sets the H.331 video protocol for the broadcast
transmission. Broadcast configuration parameters should be set to
accommodate the lowest common denominator of the systems
which are receiving the broadcast.
h263 Video protocol based on an enhanced video algorithm.
Only far-end systems that support H.263 can receive
H.263.
h261 Standard video protocol used to transmit video.
get Displays the current setting.
Example
h331videoprotocol h263
User Interface Screen Location
System Info>Admin Setup>Video Network>Video Network>
Broadcast Mode Setup: Video Protocol
This screen is only accessible if you have a V.35/RS-449/RS-530
/RS-366 network interface connected to your system.
h331videoformat <fcif|get>
Description
This command sets the H.331 video format for the broadcast
transmission. Broadcast configuration parameters should be set to
accommodate the lowest common denominator of the systems
which are receiving the broadcast.
199