Streamenable; Streammulticastip - Polycom ViewStation EX Api Manual

streamenable

streammulticastip

ViewStation EX, ViewStation FX, and VS4000 API Guide
streamenable <yes|no|get>
Description
This command enables or disables streaming on the system.
yes Enables streaming.
no Disables streaming.
get Displays the current setting (yes or no).
Example
streamenable yes
User Interface Screen Location
System Info>Admin Setup>LAN/H.323>Streaming: Allow Streaming
streammulticastip <set|get> ["ip address"]
streammulticastip set ["ip address"]
streammulticastip set
streammulticastip get
Description
This command sets the multicast IP address. A default address is
entered for you based on your system's serial number. This ensures
that you do not have the same multicast address as another
Polycom system. You can change this default address using this
command.
set Sets the multicast IP address when followed by the ip
address parameter. If you want to erase the current
setting, omit the parameter.
140 www.polycom.com