V35Prefix - Polycom ViewStation EX Api Manual

v35prefix

ViewStation EX, ViewStation FX, and VS4000 API Guide
Example
v35portsused 1+2
User Interface Screen Location
System Info>Admin Setup>Video Network>Video Network: V.35
Ports Used
This screen is only accessible if you have a
V.35/RS-449/RS-530/RS-366 network interface connected to your
system.
v35prefix <set|get> <"valid speed"> ["value"]
v35prefix set <"valid speed"> ["value"]
v35prefix set <"valid speed">
v35prefix get <"valid speed">
Description
This command sets the V.35/RS-449/RS-530/RS-366 dialing prefix.
It assumes that a profile has already been selected (see the
command v35profile on page 207).
"
set < valid speed
Sets the V.35/RS-449/RS-530/RS-366 prefix when
followed by a value parameter. If you want to erase the
current setting, omit the parameter.
valid speedValid speeds are: 56, 64, 2x56, 112, 2x64, 128, 168,
192, 224, 256, 280, 320, 336, 384, 392, 7x64, 504, 512,
560, 576, 616, 640, 672, 704, 728, 768, 784, 832, 840,
14x64, 952, 960, 1008, 1024, 1064, 1088, 1120, 1152,
1176, 1216, 1232, 1280, 1288, 21x64, 1400, 1408,
1456, 1472, 1512, 1536, 1568, 1600, 1624, 1664, 1680,
1728, 28x64, 1856, 1920, all. The parameter all lists all
the available speeds and their associated dialing
prefixes.
"
>
206 www.polycom.com