Camera1Ptz - Polycom ViewStation EX Api Manual

camera1ptz

© Polycom, Inc. 2003
ViewStation EX, ViewStation FX, and VS4000 API Guide
Example 1
camera far 2
This command causes the remote terminal to begin sending its
camera 2.
Example 2
camera far move left
This command causes the far camera to start panning to the left.
Example 3
camera near move zoom+
This command causes the near camera to zoom in.
camera1ptz <yes|no|get>
Description
This command sets camera source 1 to pan-tilt-zoom mode. This
command is specific to the VS4000 system.
Note See the command camerainput to set your VS4000
camera source to S-video or composite mode.
yes Enables pan-tilt-zoom mode.
no Disables pan-tilt-zoom mode.
get Displays the current setting (yes or no).
Example
camera1ptz yes
User Interface Screen Location
System Info>Admin Setup>Video/Camera>Cameras>VS4000
Camera Setup
35