Autoanswer - Polycom ViewStation EX Api Manual

autoanswer

© Polycom, Inc. 2003
ViewStation EX, ViewStation FX, and VS4000 API Guide
Example
audioqualityg7221 set 256
User Interface Screen Location
System Info>Admin Setup>Phone/Audio: Audio Quality
autoanswer <yes|no|donotdisturb|get>
Description
This command sets the Auto Answer Point to Point mode which
determines how the system will handle an incoming call in a
point-to-point video conference.
yes If the option Auto Answer Point to Point is set to yes,
any incoming call will be connected automatically.
no If the option Auto Answer Point to Point is set to no and
there is an incoming call, the user will be prompted with
a message "You have a video call. Would you like to
answer?". This message can be followed by a far-site
video number and a far-site name if they are available.
If the user selects yes, the call will be answered. If the
user selects no, the call will be rejected. The factory
default is set to yes.
donotdisturb If the option Auto Answer Point to Point is set to
donotdisturb, the user is not notified of the incoming
call. The site which placed the call receives a Far Site
Busy code (H.320) or Call Rejected (H.323).
get Displays the status of the option (yes, no, or
donotdisturb).
Example
autoanswer donotdisturb
User Interface Screen Location
System Info>Admin Setup>Genera Setupl: Auto Answer Point to
Point
25