Wake; Wanipaddress - Polycom ViewStation EX Api Manual

wake

wanipaddress

ViewStation EX, ViewStation FX, and VS4000 API Guide
wake
Description
This command wakes the system from sleep mode. To put the
system in sleep mode, use the command sleep.
Example
wake
wanipaddress <set|get> ["xxx.xxx.xxx.xxx"]
wanipaddress set ["xxx.xxx.xxx.xxx"]
wanipaddress set
wanipaddress get
Description
This command sets the WAN IP address.
set Sets the WAN IP address when followed by the
xxx.xxx.xxx.xxx parameter. If you want to erase
the current setting, omit the parameter.
get Displays the WAN IP address.
xxx.xxx.xxx.xxx WAN IP address.
Example
wanipaddress set 192.168.1.122
User Interface Screen Location
System Info>Admin Setup>LAN/H.323>LAN/Intranet>Firewall/
LAN Connection: NAT Outside (WAN) Address
170 www.polycom.com