Camera - Polycom ViewStation EX Api Manual

camera

ViewStation EX, ViewStation FX, and VS4000 API Guide
camera <near|far|register|unregister>
Subcommands
camera near <{1..4}|source|move|stop|getposition|
setposition|tracking>
camera far <{1..5}|source|move|stop|tracking>
camera <near|far> source
camera <near|far> move <zoom+|zoom-|left|right|
up|down|stop|continuous|discrete>
camera <near|far> stop
camera near <setposition|getposition> <x> <y> <z>
camera <near|far> tracking <on|off|to_presets|get>
camera <register|unregister>
Description
This command and its subcommands control the position and zoom
of the near-end camera, and the view (camera input) that is
presented.
Note When you are not in a call, all camera near move
commands need to be preceded by a button near
command.
near subcommands
near 1..4 Selects a near camera as the main video source
(Camera source 1-4).
near source Returns the number of the camera source currently
selected.
near move zoom+Near camera direction change (start zooming in).
near move zoom-Near camera direction change (start zooming
out).
32 www.polycom.com