0X69] Rf Reset; 0X6A] Rf On/Off - Feig Electronic OBID i-scan ID ISC.MR100 Manual

®
OBID i-scan

5.6. [0x69] RF Reset

The RF-field of the Reader antenna can be switched off for t
Thus, all Transponders which are within the antenna field of the Reader will be reset to their base set-
ting.
Host → Reader
1
5 COM-ADR
Host ← Reader
1
6 COM-ADR
Notes:
• After an RF Reset the Reader is not able to receive a new Transponder before expiration of t
• After an RF Reset, a Transponder which is located within the field must be re-selected.
• The response of this command will be sent after the RF Reset was completed.

5.7. [0x6A] RF ON/OFF

The command RF ON/OFF switches the RF field of the Reader antenna ON and OFF.
Host → Reader
1
6 COM-ADR
Host ← Reader
1
6 COM-ADR
RF:
0x00 RF-Field of Reader antenna is OFF
0x01 RF-Field of Reader antenna is ON
1
see ANNEX D: Index of Status Bytes
2
see ANNEX D: Index of Status Bytes
FEIG ELECTRONIC GmbH
System-Manual
2 3
[0x69]
2 3
[0x69]
2 3
[0x6A]
2 3
[0x6A]
Page 47 of 118
= 15 ms by the command RF Reset.
rf
4,5
CRC16
4 5,6
1
CRC16
STATUS
4 5,6
RF CRC16
4 5,6
2
CRC16
STATUS
ID ISC.MR/PR/PRH100/101-A
H01000-5e-ID-B.doc
.
rf