Feig Electronic OBID i-scan ID ISC.MR100 Manual page 14

®
OBID i-scan
Scan-Mode via USB-Interface (HID-Mode):
If an USB-Reader is set to Scan-Mode the reader works like a keyboard. The data will be transferred
as USB Key Code or as hex-values.
The user defined Sep- and End- Character will be transfered as USB Key Code.
If the number of transmitted user data is too large, only the maximal number of transmitted data will be
send plus the end character. (see:
Note:
•
If configuration protocols shall be sent to the Reader while the Scan-Mode is active, no
Transponder should be within the detection range of the Reader during this time.
•
Only read operations are available with the Scan-Mode.
FEIG ELECTRONIC GmbH
System-Manual
3.7. CFG6: Scan-Mode1)
Page 14 of 118
ID ISC.MR/PR/PRH100/101-A
H01000-5e-ID-B.doc