Related Manuals for Feig Electronic PAN MOBILE ID smartSCANNDY
Summary of Contents for Feig Electronic PAN MOBILE ID smartSCANNDY
- Page 1 IDENTIFICATION USER GUIDE ID smartSCANNDY Compact and Robust RFID-/Barcode Scanner H90316-0e-ID-B...
- Page 2 Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.
- Page 3 IDENTIFICATION ID smartSCANNDY Contents Contents Contents Safety Instructions Revision History of Documentation Scope of Delivery Product Description Technical Data Operation Charging the Battery ....................... 12 Reset to Default ....................... 12 Configuration ........................12 Scanning .......................... 13 6.4.1 1D Laser ......................13 6.4.2 1D/2D Imager .......................
- Page 4 IDENTIFICATION ID smartSCANNDY Contents 13.1 Europe (CE) ........................23 Warranty Page 4 of 24...
-
Page 5: Safety Instructions
IDENTIFICATION ID smartSCANNDY 1 Safety Instructions 1 Safety Instructions Safety Instructions ► Please read this user guide carefully and follow the given instructions and safety instructions before using the device. ► The device may only be used for the intended purpose designed by the manufacturer. This user guide should be conveniently kept available at all times for each user. - Page 6 IDENTIFICATION ID smartSCANNDY 2 Revision History 2 Revision History of Documentation Revision History Revision Date Description 29.03.2019 Initial version Page 6 of 24...
-
Page 7: Scope Of Delivery
IDENTIFICATION ID smartSCANNDY 3 Scope of Delivery 3 Scope of Delivery Scope of Delivery The scope of delivery includes following components: 1 x ID smartSCANNDY 1 x USB Charging Cable 1 x ID smartSCANNDY User Guide After unboxing please make sure, that all listed parts have been delivered properly and in good condition. Page 7 of 24... -
Page 8: Product Description
IDENTIFICATION ID smartSCANNDY 4 Product Description 4 Product Description Product Description Fig. 1: ID smartSCANNDY top view Label Description Function Left LED (green) Green LED: Lights up green when the smartSCANNDY is turned ON. Left LED (red) When the battery level is empty, it flashes every 2 sec. (Further function can be user defined with the programming interface.) Red LED: Lights up red if connected to a battery charger (USB or power adapter). - Page 9 IDENTIFICATION ID smartSCANNDY 4 Product Description Press key 1 (Trigger) until a beep sound appears. The device restarts with the new settings. USB Protection Cap Protects the USB interface from damages. Press both PANMOBIL logos on both sides to release the USB cap and access the USB connector. Fig.
- Page 10 IDENTIFICATION ID smartSCANNDY 4 Product Description Fig. 3: ID smartSCANNDY front and rear view Label Description Function RFID Antenna (optional) Antenna for RFID reader/writer Protection Glass Protection glass for the barcode and RFID reader. To have the best reading performance, keep the glass clean and free of scratches. USB (Device) Interface USB (Device) Interface Fig.
-
Page 11: Technical Data
IDENTIFICATION ID smartSCANNDY 5 Technical Data 5 Technical Data Technical Data Mechanical Data Housing Double-walled Inside: robust ABS Outside: protective rubber coating Dimension (W x H x D) 116 mm x 50 mm x 31 mm (4.57“ x 1.97“ x 1.22“) Weight 80 g (2.82 oz) Protection Class... -
Page 12: Operation
IDENTIFICATION ID smartSCANNDY 6 Operation 6 Operation Operation 6.1 Charging the Battery Before the first operation, the main battery should be fully charged by using the included USB charging cable. As long as the battery is charging the red LED will light solid red. After the battery is fully charged the red LED turns off. - Page 13 IDENTIFICATION ID smartSCANNDY 6 Operation 6.4 Scanning 6.4.1 1D Laser To scan a barcode follow the steps below: 1. Aim the scanner at the barcode. 2. Press the trigger key (3). 3. Ensure that the scanning line is directed straight at the barcode. 4.
- Page 14 IDENTIFICATION ID smartSCANNDY 6 Operation 6.4.2 1D/2D Imager To scan a barcode follow the steps below: 1. Aim the scanner at the barcode. 2. Press the trigger key (3). 3. The ID smartSCANNDY decodes the barcode closest to the cross center unless you disable the Pick- List Mode (see below) in the 2D cameras.
- Page 15 IDENTIFICATION ID smartSCANNDY 6 Operation 6.4.3 RFID To scan an RFID tag follow the steps below: 1. Aim the scanner at the RFID tag. 2. Make sure the tag is within the reader range. 3. Press the trigger key (3) to read data of the RFID tag. 4.
-
Page 16: Bluetooth Connection
IDENTIFICATION ID smartSCANNDY 7 Bluetooth Connection 7 Bluetooth Connection Bluetooth Connection To pair the Bluetooth enabled devices to a Bluetooth enabled host. 1. Connect the device to the host using the USB port and use the Master Setup to set the data output mode to Bluetooth. - Page 17 IDENTIFICATION ID smartSCANNDY 7 Bluetooth Connection 7.1 Numeric Barcodes for Bluetooth Pairing Page 17 of 24...
- Page 18 IDENTIFICATION ID smartSCANNDY 8 WiFi Connection 8 Wi-Fi Connection WiFi Connection To connect Wi-Fi enabled devices to a host. 1. Connect the device to the host using the USB port and use the Master Setup to set the data output mode to Wi-Fi.
- Page 19 IDENTIFICATION ID smartSCANNDY 9 Transmitting Data to a Host 9 Transmitting Barcode and/or RFID Data to a Host Transmitting Data to a Host Batch mode All barcodes and RFID data scanned in batch mode are saved in the file “Output.txt” on the removable drive “SCANNDY”.
-
Page 20: Troubleshooting
IDENTIFICATION ID smartSCANNDY 10 Troubleshooting 10 Troubleshooting Troubleshooting Problem Possible Solution Device does not turn on. • Make sure the battery is charged. Make sure the battery is inserted correctly. • Take off the battery cover and the battery – take a paperclip or similar. •... -
Page 21: Maintenance And Cleaning
IDENTIFICATION ID smartSCANNDY 11 Maintenance and Cleaning 11 Maintenance and Cleaning Maintenance and Cleaning To clean the lense use a clean and dry cleaning cloth. Do not use chemical cleaners, lyes or similar. Page 21 of 24... - Page 22 IDENTIFICATION ID smartSCANNDY 12 Disposal 12 Disposal Disposal Never dispose of Li-Ion batteries in household waste! Li-Ion batteries can be disposed of at special collection points. Before disposal, make sure that the Li-Ion battery is completely discharged. Page 22 of 24...
- Page 23 This equipment is intended to be commercialized in all the countries of the European Union and there is no commercialization or operational restrictions in any of the countries. Hereby, FEIG ELECTRONIC GmbH declares that this Bluetooth, Wi-Fi barcode scanner is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
-
Page 24: Warranty
14 Warranty Warranty FEIG ELECTRONIC warrants that the product will be free of defects in material and workmanship for 12 months from the date of shipment when used as intended. FEIG ELECTRONIC will, at its option, either repair or replace the defective products. Such repair or replacement shall be buyer’s sole remedy in the event of manufacturer’s breach of his limited warranty.