Protocols For Reader Control; 0X52] Baud Rate Detection; 0X55] Start Flash Loader - Feig Electronic OBID i-scan ID ISC.MR100 Manual

®
OBID i-scan

5. Protocols for Reader Control

5.1. [0x52] Baud Rate Detection

This protocol is used to detect the actual baud rate of the asynchronous interface of the Reader.
Host → Reader
1
6 COM-ADR
Host ← Reader
1
6 COM-ADR
Note:
•
The return protocol will only be sent if the inquiry is executed with the baud rate and actual
parity of the Reader.

5.2. [0x55] Start Flash Loader

This protocol starts the Flash Loader inside the Reader. Use the windows program "SKWizard" to pro-
cess the firmware update. Please refer to the Application Note "Firmware Update ID ISC.MR100"
(N10301-2d/e.....pdf) for details.
Host → Reader
1
5
Host ← Reader
1
6
Note:
•
This command is only available if the correct COM-ADR of the Reader is used.
•
All COM-addresses except 255 [0xFF] will be accept.
FEIG ELECTRONIC GmbH
System-Manual
2 3
[0x52]
2 3
[0x52]
2 3
0x00 [0x55]
2 3
0x00 [0x55]
Page 42 of 118
4 5,6
0x00 CRC16
4 5,6
0x00 CRC16
4,5
CRC16
4 5,6
0x00 CRC16
ID ISC.MR/PR/PRH100/101-A
H01000-5e-ID-B.doc