Philips Iso15693 I-Code Sli Custom Commands; 0Xa2] Set Eas; 0Xa3] Reset Eas - Feig Electronic OBID i-scan ID ISC.MR100 Manual

®
OBID i-scan

8.3. Philips ISO15693 I-Code SLI Custom Commands

8.3.1. [0xA2] Set EAS

This command sets the EAS bit to 1.
REQUEST-DATA
5
0xA2 MODE
RESPONSE-DATA (STATUS = {0x95})
5
ISO-ERROR
MODE:
Bit:
Function
ADR:
UID:
Read-only serial number of the transponder. The UID is required only in the addressed mode.
ISO-ERROR:
ISO error code of transponder response. This byte is only available if STATUS = {0x95}.

8.3.2. [0xA3] Reset EAS

This command sets the EAS bit to 0.
REQUEST-DATA
5
0xA3 MODE
RESPONSE-DATA (STATUS = {0x95})
5
ISO-ERROR
FEIG ELECTRONIC GmbH
System-Manual
6 (7-14)
UID
7 6
- -
ADR
b000 non-addressed
b001 addressed
b010 selected
6 (7-14)
UID
5 4
- -
Page 84 of 118
ID ISC.MR/PR/PRH100/101-A
3 2 1
- ADR
H01000-5e-ID-B.doc
0