Feig Electronic OBID i-scan ID ISC.MR100 Manual page 11

®
OBID i-scan
Non-addressed mode:
In non-addressed mode, it is not necessary to know the UID of the Transponder. This mode is
useful, if only one Transponder is located within the range of the Reader.
The following chart will show the necessary steps for the communication with a Transponder
in non-addressed mode:
Host (Terminal / PC / ....)
read data
write data
FEIG ELECTRONIC GmbH
System-Manual
→
Transponder in antenna field ?
Yes
←
status /
Transponder read
data
←
→
Transponder in antenna field ?
Yes
←
OK status
←
Page 11 of 118
ID ISC.MR/PR/PRH100/101-A
Reader
No
status = no Trans-
ponder
in Reader field
No
status = no Trans-
ponder
in Reader field
H01000-5e-ID-B.doc