Operation; Charging The Battery; Device Reset - Feig Electronic ID SCANNDYgun User Manual

IDENTIFICATION

6 Operation

Operation

6.1 Charging the Battery

Before the first operation, the main battery should be fully charged by using the included USB charging
cable. As long as the battery is charging the red LED will light solid red. After the battery is fully charged the
red LED turns off. A full recharge of the battery takes approx. 4 hours.
To charge the battery follow the instructions below:
1. Place the SCANNDYgun into the docking station
2. Plug the power adapter into the wall outlet.
3. The green LED on the docking station will light solid green.
4. As long as the battery is charging, the red LED lights solid red.
5. After the battery is fully charged the red LED turns off.

6.2 Device Reset

To reset the ID SCANNDYgun press and hold the hidden reset keys 5 and 6 at the same time (see Product
Description on page 8).
 NOTE:
A system reset may result in loss of data and/or configuration settings.
ID SCANNDYgun 6 Operation
Page 16 of 39