Revision History Of Documentation - Feig Electronic OBID i-scan ID ISC.MR100 Manual

®
OBID i-scan

Revision History of documentation

Rev. Date
2e 01.07.02
3e 12.09.02
4e 22.03.04
5e 08.03.05
FEIG ELECTRONIC GmbH
System-Manual
Page
Supported ISO15693Host commands for ISO15693 Transponders
90
Descriptions of the time behaviors
105
Examples of the MSB / LSB handling
115
New read operations in CFG 6 Scan Mode 1
29
Special command „[0x1B] Reset Quiet Bit"
72
New Parameter in CFG 4 Transponder Parameters: I-Code Mode
25
New Parameters in CFG 6 Scan Mode1: D-LGT; D-START.
29
Changed function of the SCAN-LOCK-TIME
Scan Mode for USB-Reader
13
KSW Custom Commands
78
Philips ISO15693 Transponder I-Code SLI Custom Commands
84
[0x18] Destroy (only I-Code EPC Transponders)
73
100
Supported ISO15693 Host commands for I-Code EPC Transponders
Differences between USB- and SCI-Reader
116
75 Infineon Custom commands
Infineon (ISO Address mode) 0xE0
93
50 New command "Get Input" for ID ISC.PRH100/110
91 Fuijtsu mb89r116 ISO15693 commands
Some additional comments to ID ISC.M02 and ID ISC.MR/PR101
45 New Protocol: [0x66] Get Reader Info
CFG3: RF-Interface, New Transponder Driver
24
108 New status message [0x17] Firmware activation required:
[0x18] Destroy (only I-Code EPC/UID Transponders)
73
Supported ISO15693 Host commands for I-Code UID Transponders
101
Codes of reader types
118
New Transponder EM4135 supported
90
Page 7 of 118
ID ISC.MR/PR/PRH100/101-A
Description
H01000-5e-ID-B.doc