Charge The Batteries In The Particle Counter; Battery Recharge Intervals; Battery Led Color Indications; Suggested Battery Recharge Interval - Beckman Coulter MET ONE 3400 Instructions For Use Manual

Charge the Batteries in the Particle Counter

Batteries in the particle counter will begin to charge when the AC power adapter is connected. A
complete charge in the instrument takes approximately 10 hours. The battery is considered to be
fully charged when the display shows a charge between 95% and 100%.
Prerequisite: Install the batteries in the instrument. Refer to
IMPORTANT
put exhausted batteries in the domestic waste.
1
Attach the power supply to the unit.
2
Connect the unit power supply to the external power through the AC power adapter.
The battery status light will show the level of power in the battery. Refer to
Table 8.1 Battery LED Color Indications
LED state
Flashing
Flashing
Solid

Battery Recharge Intervals

Table 8.2 shows the charge frequency that will increase battery life and increase the interval
between battery calibrations.
Table 8.2 Suggested Battery Recharge Interval
Frequency of use
Daily
Weekly
Monthly
When the particle counter is not is use, batteries will slowly discharge because of background
processes on the instrument.
DOC026.53.80202, Edition 7
Discard the used batteries according to local regulations or contact the manufacturer. Do not
LED color Battery status
Orange
Green
Green
0.5
Charge weekly
Charge monthly
Store on charge
Charge the Batteries in the Particle Counter
Install the
Charge status
Low power Not charging
Low power Charging
Charged Charging
Hours of sampling
1
Charge weekly Charge daily
Charge weekly Charge weekly
Store on charge Store on charge
Maintenance
Batteries.
Table 8.1.
2 6
Charge daily
Charge weekly
Store on charge
8
8-3