Change The Order Of Areas; Group Management; Add A Group - Beckman Coulter MET ONE 3400 Instructions For Use Manual

2
On the Area/Location Setup screen, select an area.
3
Push
REMOVE AREA
4
Push
YES

Change the Order of Areas

Change the listed order of areas for ease of selection. Area order does not affect sample order.
1
On the Counter Navigation screen, push
2
On the Area/Location Setup screen, select an area.
3
Push the
4
Continue to select and move areas to create the needed order.

Group Management

A group is a collection of sample parameters and settings that can include locations. The
locations in a group do not need to be geographically co-located.
Push the button on the sample screen to go to the next location in the active group.
±

Add a Group

1
On the Counter Navigation screen, push
2
In the Group Settings Management window, select
confirm.
NOTE
Use the ALT key to access special characters.
DOC026.53.80202, Edition 7
.
to delete the area or push
or arrow to change the position of the area in the list.
UP DOWN
to cancel.
NO
.
LOCATIONS
.
GROUP
. Enter the name of the group and
<NEW>
Configuration
Locations, Areas and Groups
6-17
6