IMPORTANT
About Network and Communications Setup
This section shows the setup for:
• Serial communications
• Ethernet network communication
• Wireless (Wi-Fi) communication
• Wireless security
Setup for Serial Communication
IMPORTANT
same serial port.
1
On the Counter Navigation screen, push
2
Select the Serial tab.
3
Configure these options:
• Select FX or Modbus RTU.
• Set the ID for FX or Modbus.
• Set the Baud rate.
• Select RS232 or RS485.
• Activate Manifold Support as needed (RS485 only).
• Activate Auto Increment Port as needed.
DOC026.53.80202, Edition 7
Network and Communications
Only qualified personnel should perform the tasks described in this section.
RS232 communication and manifold support cannot be used together because they use the
.
NETWORK
CHAPTER 4
4-1