Table of Contents
Advertisement
9
Optional: In the Initial Folder field, enter the initial folder where files will be kept. Leave blank
to save files to the root.
10
Select the
11
In the Authentication field, select Anonymous or Normal.
12
If Normal was selected, enter a user name and password to use for authentication with the FTP
server.
13
Push
Test Connection
NOTE
If the connection was not successful, an error message shows with the reason.
Data Transfer to the OPC Server
Only administrators, factory service personnel and operators with User Upload permission can
initiate data upload to the OPC server.
There are three settings that control the data transfer to the OPC server: User initiated upload, user-
initiated download and automatic download.
User-initiated Data Upload
Use this option to control when data is sent to the server.
1
Go to the Network screen.
2
Push
User-initiated Data Download
User-initiated download is done from the OPC server. Use this option to verify the server
connection and start the data download.
To start the data download, push
DOC026.53.80202, Edition 7
tab.
Logon
. When the connection is successful, "Test Connection Succeeded" shows.
to initiate the data transfer.
DOWNLOAD NOW
Data Transfer to the OPC Server
. All other actions are done by the server.
7
Operation
7-13
Advertisement
Table of Contents
