Table of Contents
Advertisement
Maintenance
Update the Instrument Software
1
Put the zero-count filter on the intake tube.
2
Turn on the unit and log in if needed.
3
Push
SAMPLE
4
Push
RUN
5
Repeat the process until the particle counts return to zero.
Update the Instrument Software
IMPORTANT
1
Download the self-extracting *.zip file from the location provided by the manufacturer.
2
Extract the files to a compatible USB drive. Use only manufacturer-supplied USB drives for best
results.
3
Remove AC power. Remove the batteries.
4
Plug the USB drive into the USB port.
5
Apply AC power to the instrument.
6
Select
Yes
startup.
7
To verify the version number of the update, push
Diagnostics screen.
8-2
.
.
Do this procedure with only manufacturer-supplied files and directions.
to start the update. When the update is complete, the instrument will continue
. The version will show on the
DIAGNOSTICS
DOC026.53.80202, Edition 7
Advertisement
Table of Contents
