About Status Values In Exported Data; Sample Status Bit Mask Definitions - Beckman Coulter MET ONE 3400 Instructions For Use Manual

3
Select PDF, Comma Separated File, Tab Separated File, XML or PortAll.
NOTE
The PDF option shows only after the PDF option has been set to on. Refer to
Option.
4
If PDF was selected and the settings on the PDF tab under System Settings should be used, select
the box to enable PDF Page and File Break Rules.
5
If needed, change the default file name and confirm.
6
If USB Flash Drive was selected, insert the USB drive into the USB host on the front of the
instrument. If the USB Flash Drive is not inserted, a warning will show on the screen. The
warning will change to a confirmation after the USB Flash Drive is inserted.
7
Push
EXPORT
NOTE
To stop the export, push

About Status Values in Exported Data

The status value represents several elements of unit status. Environmental, count and
concentration alarms can be indicated in the status value.
To determine the alarm conditions present in the report, subtract the largest possible value that
represents a bit from the Status value in the exported data. Refer to
Table 7.1 Sample Status Bit Mask Definitions
Bit Value
0 1
1 2
2 4
3 8
4 16
5 32
6 64
7 128
8 256
9 512
10 1024
DOC026.53.80202, Edition 7
. The status bar will show the progress.
.
Definition
Calibration
Flow
Temperature
Relative humidity
Air velocity
Manifold alarm
Count alarm
Concentration alarm
Channel 1 count alarm
Channel 2 count alarm
Channel 3 count alarm
Table
Bit Value Definition
16 65536 Channel 3 concentration alarm
17 131072 Channel 4 concentration alarm
18 262144 Channel 5 concentration alarm
19 524288 Channel 6 concentration alarm
20 1048576 Channel 7 concentration alarm
21 2097152 Channel 8 concentration alarm
22 4194304 Channel 9 concentration alarm
23 8388608 Channel 10 concentration alarm
24 16777216 Channel 11 concentration alarm
25 33554432 Channel 12 concentration alarm
26 67108864 Channel 7 count alarm
Operation
Export Data
Turn on the PDF
7.1.
7-11
7