Area Management; Add A New Area; Edit An Area; Remove An Area - Beckman Coulter MET ONE 3400 Instructions For Use Manual

Configuration
Locations, Areas and Groups
3
Select a location. Push the
4
Continue to select and move locations to create the needed order for samples.
NOTE
Arrow keys can also be used to move a location to a different area.

Area Management

Add a New Area

Use up to 15 alphanumeric characters to name an area.
1
On the Counter Navigation screen, push
2
On the Area/Location Setup screen, push
3
Enter the area name and confirm.
NOTE
Use the ALT key to access special characters.

Edit an Area

1
On the Counter Navigation screen, push
2
On the Area/Location Setup screen, select an existing area.
3
Select
EDIT AREA
NOTE
Use the ALT key to access special characters.

Remove an Area

1
On the Counter Navigation screen, push
6-16
or arrow to change the position of the location in the list.
UP DOWN
LOCATIONS
ADD AREA
LOCATIONS
. Confirm.
LOCATIONS
.
.
.
.
DOC026.53.80202, Edition 7