Option
Optional
Disabled (default)
4
To add comments to the comment list so they can be quickly selected:
a. Select
b. Use the keypad to enter a comment about a sample run.
c. Push
Set the User Interface Language
The user interface language can be changed at any time. A language change will require a system
restart.
1
On the Counter Navigation screen, push
2
Select the
3
Select the Language field to show language options.
4
Select a language. Push
Manage Units and Alarms
Units and alarms are controlled on the
velocity, relative humidity and flow rate. The high and low parameter for the flow rate alarm are
also enabled and set in this screen. The instrument can be set to work with the Vaisala HMP probe.
Preset alarm reasons are accessible from this screen.
Manage Audible Alarm Settings
The
Sounds
that are used for other alarms (stop errors, limit alarms and warnings) are selected in this tab.
DOC026.53.80202, Edition 7
Description
After each user-initiated sample cycle, the user is asked if they would like to enter a
comment for the sample. The user can then select one of the preset sample
comments from the sample comment list or enter a new comment.
The user is not asked if they would like to enter a comment for the sample after each
user-initiated sample cycle.
.
Add
.
Enter
Options and Accessories
then
OK
tab lets the user select the sound and volume to confirm user interface actions. Sounds
.
SYSTEM
tab.
to restart the instrument.
tab. Units are set for temperature, air
Units and Alarms
6
Configuration
Configure the System
6-5