Table of Contents
Advertisement
The functions of the particle counter are accessed from the Counter Navigation screen.
shows the functions that are accessible through the navigation screen.
Table 5.2
shows the functions of the other icons.
Table 5.1 Icons - Counter Navigation Screen
Icon
Function
Sample
Historical
Export
Printer
Test wizard
Locations
Group
System
Sizes
Diagnostics
Network
Factory
DOC026.53.80202, Edition 7
Particle Counter Navigation
Description
Measure particle counts. Refer to
Review measurement results in the buffer; print, export or filter data. Refer to
Review Historical Buffer
Data.
Output file as PDF, comma separated value (CSV), tab separated, XML or PortAll
files. Refer to
Export
Data.
Print sample data as hard-copy. Refer to
Test and report wizard for ISO, EU-GMP, FS or BS classification compliance. Refer to
Set up the Test and Report
Wizard.
Add/edit/remove areas; copy location settings, edit locations settings; edit alarms
for specific locations. Refer to
Load/add/edit a group; delete a group. Refer to
Time/Date; Sleep time/backlight timeout; set logon requirements; set sounds for
alarms; manage users; set the units for flow rates; manage the data buffer. Refer
to
Configure the
System.
Add/edit/delete a size (optional). Refer to
View diagnostic information for troubleshooting. Refer to
Troubleshooting.
Configure the network and communication settings. Refer to
Communications
Setup.
View the factory information including the calibration date. Refer to
Settings.
Measure Particle
Counts.
How to Use the Print
Location
Management.
Group
Management.
Sizes
Function.
Diagnostics and
CHAPTER 5
Table 5.1
Center.
About Network and
Factory
5-1
Advertisement
Table of Contents
