Manage Sample Batch Identification; Enter Or Change A Batch Id; Disable A Batch Id - Beckman Coulter MET ONE 3400 Instructions For Use Manual

5
Push

Manage Sample Batch Identification

Batch IDs are used to label different test runs. Labels can be text or numbers. The Batch ID is shown:
• On the main sample screen in the settings
• In the System Messages of the Historical screen
• In printed reports, FTP exports and all USB exports

Enter or Change a Batch ID

To enter or change a Batch ID:
1
On the Counter Navigation screen, push
2
Select the
3
Select
BATCH ID
4
Enter the Batch ID as a text, numerical or alphanumerical string. The Batch ID can use up to 29
characters.
5
Push
ENTER

Disable a Batch ID

Disable the Batch ID to stop it from showing in data reports.
1
On the Counter Navigation screen, push
2
Select the
3
Select
BATCH ID
DOC026.53.80202, Edition 7
to generate a brief report of the last completed test.
tab.
Settings
.
.
tab.
Settings
.
.
SAMPLE
.
SAMPLE
7
Operation
Measure Particle Counts
7-3