Edit A Location; Configure New Settings For The Location - Beckman Coulter MET ONE 3400 Instructions For Use Manual

3
In the Add Sample Location screen:
• Select the Location Name field. Enter the location name. Push
• Select the Location ID field to specify a numerical ID for the location. The numerical ID is
unique for each location and must be in the range of 000 – 999.
NOTE
Use the ALT key to access special characters.

Edit a Location

1
On the Counter Navigation screen, push
2
On the Area/Location Setup screen, select an existing area.
3
Select
Edit Location
4
In the Add Sample Location screen:
• Select the Location Name field. Enter the location name. Push
• Select the Location ID field to specify a numerical ID for the location.
NOTE
Use the ALT key to access special characters.

Configure New Settings for the Location

1
On the Counter Navigation screen, push
2
On the Area/Location Setup screen, select an area.
3
Select a location within the area.
• Push
• Push
4
In the Add Sample Location screen, push
DOC026.53.80202, Edition 7
.
to configure a new location.
ADD LOCATION
to change the configuration of a current location.
EDIT LOCATION
.
LOCATIONS
.
LOCATIONS
.
SETTINGS
Configuration
Locations, Areas and Groups
to confirm.
ENTER
to confirm.
ENTER
6-13
6