Installation
Wiring safety information
Wiring safety information
WARNING
disconnect.
IMPORTANT
Obey all safety statements while connections are made to the instrument.
Electrostatic discharge (ESD) considerations
IMPORTANT
damaged by static electricity, resulting in degraded performance or eventual failure.
Refer to the steps in this procedure to prevent ESD damage to the instrument:
• Touch an earth-grounded metal surface such as the chassis of an instrument, a metal conduit
or pipe to discharge static electricity from the body.
• Avoid excessive movement. Transport static-sensitive components in anti-static containers or
packages.
• Wear a wrist strap connected by a wire to earth ground.
• Work in a static-safe area with anti-static floor pads and work bench pads.
Electrical connections
Connect probes, external power, cables and USB devices as shown in
3-2
Electrocution hazard. Make sure that there is easy access to the local power
Always disconnect power to the instrument before electrical connections are made.
Potential Instrument Damage. Delicate internal electronic components can be
Figure 3.2
and
Figure
3.3.
DOC026.53.80202, Edition 7