Configuration
Configure the System
2
While the operation mode selection screen shows, do one of the actions that follow:
• Select
• Wait 10 seconds. The instrument will start in the selected operation mode.
Change the Operation Mode
Only permissions in the Advance Operation mode allow a user to change the operation mode. To
change operation mode from Advanced to Basic mode:
1
On the Counter Navigation screen, push
2
Select the
3
Select
BASIC MODE
4
Push
RETURN
Configure the System
System settings control how data is measured and stored, user permissions and other system-
wide parameters. System settings can be configured as part of instrument commission, or changed
later for different applications.
Set the Time and Date
Time and date will need to be set at initial commissioning.
1
On the Counter Navigation screen, push
2
Select the
3
Select the Time field. Use the numeric keypad to enter the current time in the HH:MM:SS
format, then confirm.
6-2
or
.
BASIC
ADVANCED
tab.
Custom
.
to restart the instrument.
tab.
Basic
.
SYSTEM
.
SYSTEM
DOC026.53.80202, Edition 7