Setup For Ethernet Communication; Setup For Wireless Communication - Beckman Coulter MET ONE 3400 Instructions For Use Manual

Network and Communications

Setup for Ethernet Communication

Setup for Ethernet Communication
1
On the Counter Navigation screen, push
2
Select the Ethernet tab.
3
Configure these options:
• Select FX or Modbus protocol.
• Enter the Modbus port number.
• Enter the Configuration port number.
• Enter the IP address or select DHCP to let the network assign the IP address.
• Enter the subnet mask address.
• Enter the gateway address.

Setup for Wireless Communication

1
On the Counter Navigation screen, push
2
Select the Wi-Fi Configuration tab.
3
Configure these options:
• Enter the Network name.
• Select the data rate.
• Select the network type: Ad hoc or infrastructure.
• Enable auto fallback as needed.
• Select the channel (Ad Hoc mode only).
• Check Enable Radio if needed.
• Select the country.
4-2
.
NETWORK
.
NETWORK
DOC026.53.80202, Edition 7