Configuration
Configure the System
5
Select the Run Mode field, then select
Change the Relative Humidity and Temperature Probe
The standard relative humidity and temperature probe is used in most applications. If an HMP
probe is needed, it can be selected on the
The scale of the standard probe and the HMP probe are different. When measurements are different
than expected, make sure that the HMP probe is selected or deselected as needed.
1
On the Counter Navigation screen, push
2
Select the
3
Select the
Manage Backup and Restore Settings
Users with administrator or System Settings permissions can make a backup of configurable
settings, and restore the backup settings as needed.
Make a Backup of Configurable Settings
1
On the Counter Navigation screen, push
2
Select the
3
Push
BACK-UP
An electronic copy of the current configuration is stored in instrument memory. This version
can be restored with the Restore function.
Restore Settings from Backup
Use the Restore function when settings become corrupt, incorrectly modified or when the software
performs abnormally.
6-10
tab.
Units and Alarms
check box to activate or deactivate the HMP probe.
HMP RH/T
tab.
Options and Accessories
.
.
BEEP
tab.
Units and Alarms
.
SYSTEM
.
SYSTEM
DOC026.53.80202, Edition 7