Table of Contents
Advertisement
Configuration
Configure the System
2
On the
Units and Alarms
3
On the Alarm Reasons screen, select
more information.
NOTE
The Alarm Reasons option is set to Disabled by default.
Table 6.1 Alarm Reasons Options
Option
Required
Optional
Disabled
Set the Sample Comments Option
To record user comments made during routine sampling, change the Sample Comments setting.
Only administrators, factory-level users or users with System Settings permissions can change the
Sample Comments setting.
1
On the Counter Navigation screen, push
2
Select
Sample Comments
3
Select an option in the field at the bottom of the screen.
Option
Required
Required on Alarm
6-4
tab, push
REQUIRED
Description
After doing a user-initiated sample cycle, the user is required to enter information about all
alarms that happen during the cycle. Alarm reasons must be defined in the Alarm Reasons
screen. The user cannot exit the Alarm History screen until a reason has been entered for
all alarms.
After doing a user-initiated sample cycle, the user is prompted to enter information about
all alarms that happen during the cycle. Alarm reasons must be defined in the Alarm
Reasons screen.
The user is not prompted to enter information about alarms.
.
Description
After each user-initiated sample cycle, the user must select one of the preset sample
comments from the sample comment list or enter a new comment.
After each user-initiated sample cycle, the user must select one of the preset sample
comments from the sample comment list or enter a new comment if an alarm(s)
occurred during the sample cycle.
.
,
or
OPTIONAL
DISABLED
.
SYSTEM
. Refer to
Table 6.1
for
DOC026.53.80202, Edition 7
Advertisement
Table of Contents
