Table of Contents
Advertisement
Configuration
Configure the System
1
On the Counter Navigation Screen, push
2
Select the
3
Select the User Feedback field.
4
Select a sound from the list of available notification sounds.
5
Select sounds for stop error, alarm limit and warnings from the list of available notification
sounds.
6
Use the slider to set the volume.
Set the Measurement Units
1
On the Counter Navigation screen, push
2
Select the
3
Select the Temperature field. Select
4
Select the Air Velocity Field. Select
5
Select the Flow Rate field. Select
Set the Flow Rate Alarm Values
Contact technical support before the flow rate alarm is changed.
1
On the Counter Navigation screen, push
2
Select the
6-6
tab.
Sounds
tab.
Units and Alarms
MM/SEC
LPM
tab.
Units and Alarms
.
SYSTEM
.
SYSTEM
(Celsius) or
(Fahrenheit).
DEG C
DEG F
or
.
FT/MIN
or
.
CPM
.
SYSTEM
DOC026.53.80202, Edition 7
Advertisement
Table of Contents
