Hmi Settings; Iec 61850-8-1 Mms Settings; Self-Supervision - ABB RELION SMU615 Technical Manual

1MRS758407 C
Parameter Values (Range)
2=60Hz
Phase rotation 1=ABC
2=ACB
Bay name
3.1.11

HMI settings

Table 16: HMI settings
Parameter Values (Range)
FB naming conven- 1=IEC61850
tion
2=IEC60617
3=IEC-ANSI
Web HMI timeout 1...60
SLD symbol format 1=IEC
2=ANSI
Setting visibility 1=Basic
2=Advanced
3.1.12

IEC 61850-8-1 MMS settings

Table 17: IEC 61850-8-1 MMS settings
Parameter Values (Range)
Unit mode 1=Primary
0=Nominal
2=Primary-Nominal
3.2

Self-supervision

The merging unit's extensive self-supervision system continuously supervises the
relay's software, hardware and certain external circuits. It handles the run-time
fault situation and informs the user about a fault through the communication
channels. The target of the self-supervision is to safeguard the relay's reliability
by increasing both dependability and security. The dependability can be described
as the relay's ability to operate when required. The security can be described
1
MMS client expects primary values from event reporting and data attribute reads
2
MMS client expects nominal values from event reporting and data attribute reads; this is the
default for PCM600
3
For PCM600 use only. When Unit mode is set to "Primary", the PCM600 client can force its
session to "Nominal" by selecting "Primary-Nominal" and thus parameterizing in native form. The
selection is not stored and is therefore effective only for one session. This value has no effect if
selected via the front port WHMI.
SMU615
Technical Manual
Unit Step
Unit
min
Unit
1
2
3
Default
1=ABC
SMU615
Step Default
1=IEC61850
1 3
1=IEC
1=Basic
Step Default
0=Nominal
Basic functions
Description
Phase rotation order
Bay name in system
Description
FB naming convention used
in IED
Web HMI login timeout
Single Line Diagram symbol
format
Setting visibility for HMI
Description
IEC 61850-8-1 unit mode
37